Library
Operation
Cartridge Moves: |
14 seconds average |
Inventory Time: |
Less than 2 minutes without barcode scanner |
Library Management Interface: |
Integrated Web Server (Remote Management Unit) |
Indicators: |
LCD menu display for drive activity and for alert and error messages |
Controls: |
5-button keypad; front panel on-off switch |
Import/Export |
1 slot |
Physical
Dimensions, Desktop: |
17.9"W x 25.8"D x 7.7"H
(45.5cm x 65.4cm x 19.4cm) |
Dimensions, Rack Mount: |
17.6"W x 23.6"D x 6.8"H
(44.7cm x 60.0cm x 17.2cm) |
Rack Height: |
7" (17.8cm), or 4 rack units |
Weight:
|
56.6lbs (25.7 kg)
66.7 lbs (30.3 kg) |
|
Shipping Weight: |
Up to 85 lbs (38.2 kg) |
Environmental
Electrical: |
100-240 VAC; 50-60 Hz; 4.0-1.7A; Auto Voltage Select |
Temperature: |
50 to 100° F (10 to 38° C) operating |
Humidity: |
20 - 80% non-condensing operating |
Power Consumption Typical*
|
Library with RMU (no drives or SNC):
LTO-2 drive sled (each):
SDLT 600:
SDLT 320 drive sled (each):
SNC 4000(FC): |
|
27W, 92.1 BTU/hr
36W, 123 BTU/hr
33W, 113 BTU/hr
35W, 120 BTU/hr |
|
Storage Networking Support
Platform/Connectivity: |
SNC 4000 (1 FC type LC x 2 LVD SCSI)
LTO-2 NF
LTO-3 NF |
FC Features: |
End-to-end data path readiness checks, error recovery, and SAN security for imporved reliability. Drive performance optimization and sererless backup for higher performance. |
Reliability
MSBF/MTBF: |
Rated for over 11 years of high duty cycle operation(500,000 MSBF/100,000 MTBF) |
MTTR: |
Less than 30 minutes |
Diagnostics: |
Auto-inventory; on-line diagnostics available through front panel; SNMP alerts via RMU or ADIC Management Console (Fibre Channel); Tape Alert |
Compliance and Certification
Safety: |
EN60950; 3rd Edition 1999-2004, including all country deviations; EN60825-1, safety of laser equipment |
Emissions: |
Complies with FCC #47, Part 15 for Class A Products (US); ICES-003 (Canada); VCCI Class A (Japan); EN55022-1994; EN61000-3-2, 1994; EN61000-3-3, 1994 |
Immunity: |
EN55024 - 1998 ITE |
International: |
CD, BSMI |
NOTE:
* Power consumption is obtained using RMS values for voltage and current. Drive sled consumption is taken while writing to a drive.