Support

Quantum

Scalar 100

  • Scalar 100 Library

Operation

Cartridge Change: 10 seconds
Inventory Time: Less than 60 seconds
Library Management Interface Operator Panel: Password-protected, context-sensitive LCD menu display with backlight; displays library, drive, and mailbox activity
Remote Management: Integrated web server (Remote Management Unit or RMU)
Drive: Operational status LED; single character display
Library Interface: Switch selectable for HVD, LVD/SCSI or Fibre Channel
Drive Interface: LTO-3, LTO-2, SDLT600, SDLT320: LVD SCSI
SCSI Connection: 68-pin micro-D
Import/Export 10 SDLT or 12 LTO cartridge positions
Storage Networking Support
Platform/Connectivity: SNC 6101 (2 FC x 4 LVD SCSI)
SNC 4500 (2Gbe x 2 LVD SCSI)
FC Features: End-to-end data path readiness checks, error revovery, and SAN security for imporved reliability. Drive performance optimizaion and serverless backup for higher performance.
iSCSI Features: Redundant Ethernet connections, error recovery, web-based management, and a step-by-step deployment path to backup consolidation.

Physical

Dimensions, stand-alone: 18.9”W x 28.8”D x 25”H (48.0cm x 73.2cm x 63.5cm)
Dimensions, rack mounted: 17.4”W x 28.8”D x 24.5”H (44.2cm x 73.2cm x 62.2cm)
Rack Height: 14 Rack Units
SNC 4500, rack-mounted: 16.9"W x 10"D x 1.72"H (42.9cm x 25.4cm x 4.3cm)
Shipping Weight: 166lbs (75.5kg) to 245lbs (111.4kg) fully loaded

Environmental

Safety: C-TUV-US, TUV/GS, IEC 60950 with worldwide country deviations
Emissions: FCC, VCCI, CISPR 22 and EN 55022 Class A, EN 61000-4-2, 3, 4, 5, 6, 8, and 11
Immunity: EN 55024, CISPR 24
International: CE, BSMI

Reliability

Drive Hard Error Rate: Less than 1 in 1017 bits per permanent read error
Tape Shelf Life: 30 years minimum (at 20 ºC, 40%RH)
MSBF: Greater than 1,000,000
MTBF: Greater than 250,000 power on hours
MTTR: Less than 30 minutes
Power: Redundant power supplies available
User Upgrades: Drives, mailbox, storage capacity columns, magazines, rackmount kit, casters, second power supply, Storage Networking Controller
Field Replaceable: Power supplies, picker assembly, control electronics, Hot Swap Drives1, RMU
Diagnostics: Auto calibration, auto inventory, Built-In-Test (BIT), SNMP alerts via RMU

Compliance and Certification

Safety: C-TUV-US, TUV/GS, IEC 60950 with worldwide country deviations
Emissions: FCC, VCCI, CISPR 22 and EN 55022 Class A, EN 61000-4-2, 3, 4, 5, 6, 8, and 11
Immunity: EN 55024, CISPR 24
International: CE, BSMI

Notes:

1 Without affecting library operation. Bus integrity must be sustained.
2 Power consumption is obtained using RMS values for voltage and current. Indicated Agency Label value for maximum volt-Amperes of 240V*3.5A (840W) should be used to determine non-cooling system requirements. Drive sled power consumption is taken while writing to a tape.

Note: Veritas BackupExec and Veritas NetBackup Drivers 
If you are using Veritas BackupExec or Veritas NetBackup you should use the device driver that came with your software backup package.
  • Download

    Windows Driver for Scalar 100

    Windows 2003 Drivers for S24/S100/i500/i2000.
Note: Quantum Tape Drive drivers can be found on the individual drive download page.

The current library firmware version and drive firmware versions are listed below. Please Contact Quantum Support if you need the latest firmware version and you have an active Warranty or Service Maintenance Contract.

  • Scalar 100 version 6.10.0004 for LTO-3

    Version 6.10.0004 library firmware for Scalar 100 libraries with LTO-3 tape drives.
  • SNC 6101 Version 4.60.04 for Scalar 100

    SNA Version 6101 Version 4.60.04 for Scalar 100 libraries with version 6.10.0004 library firmware.
  • RMU 210A.0002 for Scalar 100 6.10 firmware

    Version 210A.0002 RMU firmware for Scalar 100 libraries with version 6.10.0004 library firmware.
  • Scalar 100 version 3.34.0003 for SDLT, AIT, LTO-1 and LTO-2

    Version 3.34.0003 library firmware for Scalar 100 libraries with SDLT, AIT, LTO-1 and LTO-2 tape drives.
  • SNC 5101 Version 4.45.04 for Scalar 100 3.34 Firmware

    SNC 5101 Version 4.45.04 for Scalar 100 libraries with version 3.34.0003 library firmware.
  • SNC 6101 Version 4.60.03 for Scalar 100 3.34 Firmware

    SNC 6101 Version 4.60.03 for Scalar 100 libraries with version 3.34.0003 library firmware.
  • RMU 194A.0004 for Scalar 100 3.34 Firmware

    Version 194A.0004 RMU firmware for Scalar 100 libraries with version 3.34.0003 library firmware.
  • Download

    ADIC Management Console 4.3.2 Win

    ADIC Management Console 4.3.2 for Scalar 24 on a Windows platform.
  • Download

    ADIC Management Console 4.3.2 AIX

    ADIC Management Console 4.3.2 for Scalar 24 on an AIX platform.
  • Download

    ADIC Management Console 4.3.2 HPUX

    ADIC Management Console 4.3.2 for Scalar 24 on an HPUX platform.
  • Download

    ADIC Management Console 4.3.2 Linux

    ADIC Management Console 4.3.2 for Scalar 24 on a Linux platform.
  • Download

    ADIC Management Console 4.3.2 Solaris

    ADIC Management Console 4.3.2 for Scalar 24 on a Solaris platform.

Product Updates

Product Use Guides

Planning and Installation Guides

Safety Guide

Quantum Knowledge Base Information