DS9000

Capacity, Performance, Cost Effectiveness

FEATURES SUMMARY:

The DS9000 Series is equipped with a third-, or fourth-generation DLT drive. Tape density is selectable by the application software or via the Operator Panel.

 
  • TapeDS9000LgDrive

Operation

Drive Type: Quantum DLT4000
Quantum DLT7000
Quantum DLT8000
ADIC 4000, DS9400D/L
DS9700D
DS9800D
Data Transfer Rate
(compressed mode):
180 MB/min - ADIC 4000, DS9400D/L
600 MB/min - DS9700D
720 MB/min - DS9800D
Electrical Interface: SCSI - ADIC 4000, DS9400D/L
SCSI Fast, Wide - DS9700D
SCSI Fast, Wide - DS9800D
Physical Interface: 50-pin, shielded, low-density device connector
68-pin, shielded, high-density device connector

Environmental

Electrical: 100-240 vac, 50-60 Hz, 0.6 - 0.3A
Power Consumption: less than 40 watts
BTU/Hour: 170 to 205
Temperature: 10 to 40 C operating
Humidity: 20 to 80% non-condensing operating
Vibration: 0.25G (5-500 Hz) (Operating)
0.5G (5-500 Hz) (Storage/Shipping)
Shock: 2G Operating
30G Storage/Shipping

Reliability

Maintenance: Periodic cleaning of drive head using DLT cleaning cartridge.
MTBF: More than 80,000 power-on hours
MTTR: Within 30 minutes (drive replacement)

Physical

Dimensions: 5.75"(h) x 10.50" (w) x 14.50" (d)
Weight: 14 lbs.
Note: Quantum Tape Drive drivers can be found on the individual drive download page.
  • There is no user updateable firmware for this product.
  • There are no diagnostic downloads for this product.

Resources