Support

Quantum

DPM5500

  • dpm5500DPM5500

Physical Characteristics

Chassis width 19 in. (48.3 cm)
Chassis height 8.75 in.(22.2 cm), 5U
Chassis depth 25.4 in. (64.5 cm)
Weight (with 2 Arrays) 122 lbs (55.33 kg)

Environmental Limits

Operating Temperature 50F to 95F (10C to 35C)
Operating Non-condensing humidity 20% to 80%
Altitude Sea Level to 10,000 ft. (3,048 m)
Non-operating Temperature -4F to 140F (-20C to 60C)
Non-operating Non-condensing humidity 15% to 95%

Power

Voltage (with 2 Arrays) 100 VAC to 240 VAC
Rated Current 5A @230 VAC x 4
Power Consumption 700 W
  • There are no user updateable drivers for this product.
  • There is no user updateable firmware for this product.

Product Use Guides

Planning and Installation Guides

Quantum Knowledge Base Information

What is the thru put of the HH LTO4 drives we use in the i40 and i80?

 

The document MA01100A_v1 states the figures below, but our user guide (LTO4HH_User_Guide_20020140-001.pdf) for the LTO HH drives state Native Transfer Rate of 128MB/s.  Could you please tell me which figure is correct.

 

Thanks 

e Slots

With COD License)

Native Drive Performance

288GB/hr (HH)

432GB/hr (FH)

InterfaceOptions

native Fibre Channel 4Gb (LC connector)

SAS 3Gb (SFF-8088 connector)

Native transfer rates for the HP LTO-4 drives used in i40 and i80 are:

 

FH: 120 MB/sec

HH:   80 MB/sec