|
|
|
|
|
|
Capacity and Interface
 |
|
|
|
| Compressed Capacity |
Up to 20 GB |
| Native Capacity |
Up to 10 GB |
| Recording Format |
QIC-3220 |
| Interface Type |
SCSI-2 |
|
|
|
|
|
Environmental
|
|
|
|
| Min/Max Operating Temp |
5 deg C / 45 deg C |
| Max Operating Humidity |
80% |
| Max Operating Shock |
2.5 Gs |
| Max Non-Operating Shock |
100 Gs |
| Max Operating Vibration |
.5 G |
| Max Non-Operating Vibration |
1.5 G |
|
|
|
|
|
Performance
|
|
|
|
| Native Sustained Transfer Rate |
3.6 GB/hour |
| Compressed Sustained Transfer Rate |
up to 7.2 GB/hour |
| Drum Rotational Speed |
N/A |
| Backup Speed |
3.6 GB/hour |
| Compressed Backup Speed |
up to 7.2 GB/hour |
| Buffer Memory Size |
512kb |
|
|
|
|
|
|
|
|
|
|
 |
Note: Veritas BackupExec and Veritas NetBackup Drivers
If you are using Veritas BackupExec or Veritas NetBackup you should use the device driver that came with your software backup package. |
|
- Travan 8 & 20 SCSI on Windows NT 3.51
- Certance SCSI Travan Tape Driver v1.07. This driver is only required if your drive is labeled "Seagate" and has an "STTxxxxx" part number (Travan 8 and 20 SCSI tape drives). It supports the NT 3.51 Backup Applet.
|
|
|
- Travan 8 & 20 SCSI on Windows NT 4.0
- Certance SCSI Travan Tape Driver v1.07.
|
|
|
|
|
|
|
|
- Version 6A51
- Version 6A51 firmware upgrade for the STTx20000N SCSI-interface drive.
|
|
|
- Version 7A61
- Version 7A61 firmware upgrade for the STTx20000N-C NS-series SCSI-interface drive
|
|
|
|
|
|
|
|
- TapeRx 4.6
- TapeRx for Windows
|
|
|
- TapeRx 4.6
- TapeRx for Linux
|
|
|
- TapeRx 4.6
- TapeRx for Netware
|
|
|
- TapeRx 4.6
- TapeRx for Solaris
|
|
|
- SGTape 2.1
- SGTAPE v2.1 Tape Diagnostic Utility for DOS and Netware
|
|
|
- Reten-NT
- This simple DOS program retensions a tape in either ATAPI or SCSI Travan drives. This program can be added to any existing batch file so a retension is included as part of an overall test.
|
|
|
- Reten
- This simple DOS program retensions a tape in either ATAPI or SCSI Travan drives. This program can be added to any existing batch file so a retension is included as part of an overall test.
|
|
|
|
|
Product Use Guides
Planning and Installation Guides
|
