 |
|
SuperLoader 3 |
 |
|
 |
| |
|
2U Rackmount Design- can also be used as a tabletop unit | |
| | |
Physical Characteristics | | | | | Form Factor | 2U | | Width | 16.7" | | Length | 27.5" | | Height | 3.41" | | Weight (typical configuration) | 31 lbs |
| | | | |
Performance by Drive Type
Drive Type (only one type per unit, not interchangeable) | | | | | 1 Quantum SDLT600 drive, or | | 1 Quantum DLT-S4 drive, or | | 1 Quantum DLT-V4, or | | 1 Quantum VS160 drive, or | | 1 Quantum LTO-2 Half-height drive, or | | 1 Quantum LTO-3 Full-Height drive, or | | 1 Quantum LTO-3 Half-Height drive, or | | 1 Quantum LT0-4 Half-Height drive, or | | 1 HP LTO-4 drive |
| | | | |
Environmental Specifications | | | | | Temperature Range (Dry Bulb) | | Operating | +10°C to +35°C | | Nonoperating | -40° C to +65°C | | Temperature Variation | | Operating | 10°C per hour | | Nonoperating | 20°C per hour | | Humidity | | Operating | 20% to 80% noncondensing | | Nonoperating | 10% to 90% noncondensing | | Gradient | 10% per hour without condensation | | Wet Bulb | | Operating | 26°C max | | Nonoperating | 29°C max | | Altitude | | Operating | -153 m to 3048 m | | Nonoperating | -153 m to 12192 m |
| | | | |
Power Specifications | | | | | Line Voltage | 60Hz System: 90-265 VAC;
50Hz System: 90-265 VAC | | Line Frequency | 47 - 63 Hz | | AC Input Current | 60Hz System: 4.0 A (RMS) for 115 VAC;
50Hz System: 4.0 A (RMS for 230 VAC | | Power Consumption | 60Hz = 75W
50Hz = 80W |
| | | | |
| | |
 | Note: Veritas BackupExec and Veritas NetBackup Drivers
If you are using Veritas BackupExec or Veritas NetBackup you should use the device driver that came with your software backup package. |
 | - WinNT Tape Drive Device Driver
- Tape Drive Device Driver for Windows NT with DLT1, SDLT220, or SDLT320 tape drives.
| | - Win2K/2K3/XP (x86, x64)
The device driver allows you to use DLT tape drives with Windows 2000, Windows XP and Windows Server 2003 running on x86 and x64 platforms. This is a self-extracting, compressed file that unzips into a set of files. Please view the ReadMe.htm file for installation instructions.
|
| | | | - V61 Library Firmware
- Make sure to upgrade to the latest library firmware to realize the most out of your SuperLoader 3.
Note: When upgrading to V61 you must make sure your tape drive firmware is at the version listed below.
|
| | |
StorageCare Sage xTalk Management Console - In less than thirty minutes xTalk will evaluate your tape drive's health and determine if it needs to be sent in for service. The application also provides detailed engineering drive analysis information and the abilty to quickly download updates to the firmware, application, online help, test script and release notes.
| | - StorageCare Sage xTalk for Windows
| | - StorageCare Sage xTalk for Solaris
Please view the README_solaris.txt file for information on unpacking and installing this package.
This program is compatable with the following Solaris operating systems:
- SolarisSparc 2.8 (must have latest patches from Sun)
| | - StorageCare Sage xTalk for Linux
Note: This version of xTalk has no firmware upload cabability. This program is compatible with the following Linux operating systems:
- Kernel 2.4.7-10
|
| | |
Product Updates
Product Use Guides
Planning and Installation Guides
Quantum Knowledge Base Information |
|
|
|
 |
|
 |
|
 | | | Knowledge Base Search |  |
|  | |
Enter your search term below
Results open in a new window |
| |  | |  | |
|
|
|
|
|
|
|
| |
|
