 |
|
SDLT320 |
 |
|
 |
| |
|
| | |
Performance | | | | | Native sustained transfer rate | 16 MB/s | | 2:1 compressed transfer rate | 32 MB/s | | Burst transfer rate SCSI bus | 80 MB/s max | | Native formatted capacity | 160 GB | | 2:1 compressed capacity | 320 GB | | Cartridge load time to BOT, formatted tape | 12 sec | | Cartridge load time to BOT, unformatted tape | 40 sec | | Average file access time | 70 sec | | Interfaces available | LVD, Ultra 2 SCSI, HVD, Ultra SCSI |
| | | | |
Tape Format | | | | | Recording format | 448 track serial serpentine | | Recording density | 193 k bits / inch | | Track density | 1058 tpi | | Encoding method | Partial Response Maximum Likelihood (PRML) | | Data compression | DLZ |
| | | | |
Reliability | | | | | MTBF | 250,000 hours at 100% duty cycle | | Media durability | 1,000,000 passes / 17,850 uses | | Uncorrected error rate | 1 x 1017 bits read | | Undetected error rate | 1 x 1027 bits read | | Warranty | 3 years |
| | | | |
Physical Specifications | | | | | Tabletop | Embedded | | Width | 6.9" / 175.26 mm | 5.74" / 145.79 mm | | Height | 6.46" / 164.08 mm | 3.24" / 82.29 mm | | Depth | 12.8" / 325.12 mm | 8.37" / 212.59 mm | | Weight - varies by configuration | 13 lb 13 oz / 6.27 kg | 5 lb 4 oz / 2.38 kg |
| | | | |
Environmental Limits | | | | | Operating Temperature | 50° to 104° F / 10° to 40° C | | Non-condensing humidity | 20% to 80% | | Altitude | -500' to +30,000' max | | Non-operating Temperature | -40° to 151° F/-40° to 66° C | | Non-condensing humidity | 10% to 95% |
| | | | |
Power | | | | | Voltage | +5V, +12V | | Power consumption | 27 Watts (average read / write operation) |
| | | | |
Media compatibility | | | | | Super DLTtape I | 160 or 110 GB native capacity | | DLTtape IV - read only in SDLT 220 | 20, 35 or 40 GB native capacity |
| | | | |
Tape Life | | | | | Archive storage - with < 10% loss in demagnetization at 20° C and 40% non-condensing humidity | > 30 years | | Durability - average in typical office / computing environment | 1,000,000 head passes |
| | | | |
| | |
 | Note: Veritas BackupExec and Veritas NetBackup Drivers
If you are using Veritas BackupExec or Veritas NetBackup you should use the device driver that came with your software backup package. |
 | - WinNT
Device driver to allow use of DLTtape Tape Drives with Windows NT 4.0 running on Intel x86 platforms. This is a self-extracting, compressed file that unzips into a set of files. Please view the README.TXT file for installation instructions.
| | - Win2K/2K3/XP (x86, x64)
The device driver allows you to use DLT tape drives with Windows 2000, Windows XP and Windows Server 2003 running on x86 and x64 platforms. This is a self-extracting, compressed file that unzips into a set of files. Please view the ReadMe.htm file for installation instructions.
|
| | |
| - V94 (for standalone drives only)
V94 update is recommended for improved compatibility with Independent Software Vendors (ISVs) and Operating Systems (OS), as well as overall product reliability improvement. Note: This firmware is for standalone drives only. If your drive is in a library contact your service representative regarding firmware updates.
Instructions for upgrading firmware via a FUP tape can be found here.
|
| | |
StorageCare Sage xTalk Management Console - In less than thirty minutes xTalk will evaluate your tape drive's health and determine if it needs to be sent in for service. The application also provides detailed engineering drive analysis information and the abilty to quickly download updates to the firmware, application, online help, test script and release notes.
| | - StorageCare Sage xTalk for Windows
| | - StorageCare Sage xTalk for Solaris
Please view the README_solaris.txt file for information on unpacking and installing this package.
This program is compatable with the following Solaris operating systems:
- SolarisSparc 2.8 (must have latest patches from Sun)
| | - StorageCare Sage xTalk for Linux
This program is compatible with the following Linux operating systems:
- Kernel 2.4.7-10
|
StorageCare Sage iTalk is diagnostic software that allows users to quickly test the integrity of a Super DLTtape drive. This application uses an IR (Infrared) device connected to a PC to communicate with the tape drive. StorageCare Sage iTalk can be used to test a standalone drive or a drive installed in a library. | | - StorageCare Sage iTalk for Windows
Double-click on the downloaded file to begin installation.
|
StorageCare Sage Pocket iTalk is diagnostic software that allows users to quickly test the integrity of a Super DLTtape drive using a Pocket PC. This application uses the IR (InfraRed) port on your Pocket PC to communicate with the tape drive. Pocket iTalk can be used to test a standalone drive or a drive installed in a library. | | - StorageCare Sage Pocket iTalk for Windows
Double-click on the downloaded file to begin installation.
| | - DFU for Windows
- Drive Firmware Upgrade for Windows
| | - DFU for Linux
- Drive Firmware Upgrade for Linux
| | - DFU for NetWare
- Drive Firmware Upgrade for NetWare
|
| | |
Product Updates
Product Use Guides
Planning and Installation Guides
Reference Guides |
|
|
|
 |
|
 |
|
 | | | Knowledge Base Search |  |
|  | |
Enter your search term below
Results open in a new window |
| |  | |  | |
|
|
|
|
|
|
|
| |
|
