FastStor 2

  • AutoloaderAutoloader


Cartridge Change: 10 seconds maximum
Indicators: LCD menu display for drive, media, configuration, and diagnostic status; power, activity and alarm LEDs
Controls: 4-button keypad, recessed on-off switch on front panel
Interface: High density, 68-pin, SCSI-2


Noise Level: <58 dBA operation
Vibration: .25g Sine (3-200 Hz) operating, tested per ISTA for storage/shipping
Shock: 31g operating, tested per ISTA for storage/shipping
Electrical: 100-240 V; 50-60 Hz; Auto Voltage Select
BTU/hr: 240
Humidity: 20 - 80% non-condensing operating
Altitude: 0 to 15,000 feet, at 25C ambient
Temperature: 50 to 95F (10 to 35C) operating


Hard Error Rate: Less than 1 in 1017 bits read
Tape Shelf Life: 30 years minimum (at 20C, 40% RH)
Maintenance: Head cleaning with cartridge when indicated by drive
MSBF: Greater than 250,000 cartridge changes
MTBF: Greater than 100,000 power-on hours (LTO and SDLT)


Dimensions (Rack Mount and Desktop)
Minimum 16.46"W x 24.34"D x 3.4"H
(41.8cm x 61.8cm x 8.5cm)
Maximum 16.62"W x 24.34"D x 3.5"H
(42.2cm x 61.8 cm x 8.7cm)
Rack Height: 2U (3.47"/8.8cm)
Weight: 20.94 lbs (9.5kg)
Shipping Weight: 27.56 lbs (12.5kg)

Compliance and Certification

Safety: IEC 60950 with worldwide country deviations, UL 1950 3rd edition, CSA950 C22.2
Emissions: CISPR 22, EN5502 Class B
Immunity: EN55024
  • There are no user updateable drivers for this product.
  • The current library firmware version and drive firmware versions are listed below. Please Contact Quantum Support if you need the latest firmware version and you have an active Warranty or Service Maintenance Contract.

    FastStor 2 v 3.9.19 Library and Drive Firmware Upgrade / Library Management Tool

  • There are no diagnostic downloads for this product.


Product Use Guides

Planning and Installation Guides

Quantum Knowledge Base Information

Safety Guide