 |
|
DAT 24 Drives |
 |
|
 |
| |
|
| | | Capacity and Interface | |  | | | Compressed Capacity | Up to 24 GB | | Native Capacity | Up to 12 GB | | Recording Format | DDS-3 | | Interface Type | SCSI-2 |
| |  | |  |
Environmental | |  | | | Min/Max Operating Temp | 5 deg C / 45 deg C | | Max Operating Humidity | 80% | | Max Operating Shock | 10 Gs | | Max Non-Operating Shock | 50 Gs | | Max Operating Vibration | .5 G | | Max Non-Operating Vibration | 1.5 G |
| |  | |  |
Performance | |  | | | Native Sustained Transfer Rate | 3.96 GB/hour | | Compressed Sustained Transfer Rate | up to 7.92 GB/hour | | Native Burst Transfer Rate | up to 300 MB/min | | Compressed Burst Transfer Rate | up to 600 MB/min | | Average File Access Time | < 40 seconds | | Search Speed | 200 times normal | | Drum Rotational Speed | up to 8000 RPM | | Backup Speed | 3.96 GB/hour | | Compressed Backup Speed | up to 7.92 GB/hour | | Buffer Memory Size | 2 MB |
| |  | |  |
| | |
 | Note: Veritas BackupExec and Veritas NetBackup Drivers
If you are using Veritas BackupExec or Veritas NetBackup you should use the device driver that came with your software backup package. |
 | - DAT 72 BakBone Template
- SDAT721.npk Template for the DAT72 drive (will work with older generation DDS 2, 3, & 4 drives).
|  | - Certance/Seagate DAT Tape Driver v1.08 for Windows NT 3.51
- STDAT3 for all DDS, DDS-1, DDS-2, DDS-3, & DDS-4 drives including DDS-3 autoloaders.
|  | - Certance/Seagate DAT Tape Driver v1.08 for Windows NT 4.0
- STDAT4 for all DDS, DDS-1, DDS-2, DDS-3, & DDS-4 drives including DDS-3 autoloaders.
|  | - DDS3 24 Drive Driver for Windows 2000
- Certance/Seagate DAT Tape Driver v1.6h for 32 and 64-bit intel Platforms - stdatw2k.sys - 03-03-04
|  | - DDS3 24 Drive Driver for Windows 2003
- Certance/Seagate DAT Tape Driver v1.6h for 32 and 64-bit intel Platforms - stdatw2k.sys - 03-03-04
|  | - DDS3 24 Drive Driver for Windows XP
- Certance/Seagate DAT Tape Driver v1.6h for 32 and 64-bit intel Platforms - stdatw2k.sys - 03-03-04
|
| | |
 | - Version V7600
- Version V7600 firmware upgrade for the STDx24000 drive.
Upgrade instructions can be found here.
|
| | |
StorageCare Sage xTalk Management Console - In less than thirty minutes xTalk will evaluate your tape drive's health and determine if it needs to be sent in for service. The application also provides detailed engineering drive analysis information and the abilty to quickly download updates to the firmware, application, online help, test script and release notes.
|  | - StorageCare Sage xTalk for Windows
Double-click on the downloaded file to begin installation.
|  | - StorageCare Sage xTalk for Solaris
Please view the README_solaris.txt file for information on unpacking and installing this package.
This program is compatible with the following Solaris operating systems:
- SolarisSparc 2.8 (must have latest patches from Sun)
|  | - StorageCare Sage xTalk for Linux
Please view the README_linux.txt file for information on unpacking and installing this package. This program is compatible with the following Linux operating systems:
- Kernel 2.4.7-10
|
 | - TapeRx 4.6
- TapeRx for Windows
|  | - TapeRx 4.6
- TapeRx for Linux
|  | - TapeRx 4.6
- TapeRx for NetWare
|  | - TapeRx 4.6
- TapeRx for Solaris
|  | - DFU for Windows
- Drive Firmware Upgrade for Windows
|  | - DFU for Linux
- Drive Firmware Upgrade for Linux
|  | - DFU for NetWare
- Drive Firmware Upgrade for NetWare
|  | - DFU for Solaris
- Drive Firmware Upgrade for Solaris
|
| | | Product Use Guides | |
|
 |
 |
 |
 |
 |
|
 | | | Knowledge Base Search |  |
|  |  |
Enter your search term below
Results open in a new window |
|  |  |  |  | |
|
|
|
|
|
|
|
| |
|